Glass Block Wall and Bar Sizes For Design and style and Installation Accomplishment

“Why can not designing and installing rounded baseboard corners wall or bar be as uncomplicated as putting together Lego blocks,” a buyer when asked. Although it’s not that straightforward, with the new shapes, sizes, prefabrication methods and installation accessories obtainable nowadays this exceptional glass wall item is getting utilised increasingly in properties, businesses and commercial buildings. Adhere to these 5 methods and you will be able to produce a cool, stylish, and easy to sustain wall or bar.

Step 1) Exactly where do you desire to make use of your glass block wall or bar? How huge do you need to create the wall?

These specialized glass walls can be used around the inside, inside the exterior structure from the household or constructing, or perhaps around the outdoors. Most typical utilizes include partition walls to separate rooms, shower walls, and bars for the kitchen and recreation rooms. Once you are designing and figuring out the supplies required for this project the size and shape in the wall are essential.

o Glass block bar sizes & shapes – Most bars are built 40″ high (5 courses of 8″ blocks stacked on top of each other). The countertop is installed after the block work is finished. For extra stability and cool design and style consider making your bar with either an “L shaped” or angled shape design and style or rounded (radius) look. The bars should be anchored into one wall for added support.

o Glass block wall sizes & shapes – Block walls is usually built virtually any size, however the maximum dimensions of each wall section (or panel) will vary based on the thickness with the block (3 1/8″ or 3 7/8″ thick) and if the wall will be around the inside or exterior of the household or constructing. Since most walls are built using the 3 7/8″ thick size, here’s a quick reference for how huge you can make your wall without the need for some type of engineered steel or aluminum support structure between your glass panels:

  1. Maximum inside wall panel dimensions (3 7/8″ thick block)
  • Total square footage of your wall – 250 sq. feet.
  • Maximum height – 20 feet
  • Maximum width – 25 feet
  1. Maximum outside wall panel dimensions (3 7/8″ thick block)
  • Total square footage from the wall – 144 sq. feet.
  • Maximum height – 20 feet
  • Maximum width – 25 feet
installing rounded baseboard corners

Step 2) What type of floor, partial wall or base will the block wall be placed on? What is the smallest width of the base for the block wall?

Block walls or bars might be placed virtually on any surface as long as it is structurally sound and approximately 3″ to 4″ wide. Most block walls weigh about 12 pounds per square foot of wall area. Shower pans made of acrylic, fiberglass, and tile with concrete work well. Interior walls with wood joists are usually fine as well as long as the floor is level. Placing the block on knee walls (also called half walls) with metal stud and drywall supports underneath works as well.

Step 3) What do you need to put your glass block wall or bars collectively? Can panel sections be manufactured to make the project easier?

The installation of block walls might be made much easier together with the use of spacers, installation systems, or purchasing pre-made sections of block. Here’s a quick overview of each type of approach:

o Glass Block Spacers – In the old days block had to be laid piece by piece by a skilled mason contractor – these skilled craftsmen may be expensive and difficult to find. Using the use of all plastic spacers the blocks could be laid uniformly and the spacers even help to keep the wall or bar flush and in place as you’re developing it. Spacers are obtainable for either straight or radius walls.

o Installation systems – The new vinyl stack installation system uses vinyl horizontal and vertical spacers between the blocks to align and hold the blocks in place for uncomplicated assembly. Silicone is made use of to bond the blocks to the vinyl spacers around the inside with the block wall. This system can be made use of for interior and exterior applications. Special tile grout or silicone is usually applied to finish off the joints.

o Prefabricated or pre-made block sections – Together with the vinyl stack installation system sections of block is often pre-assembled and installed in the field. Glass block panel manufacturers can build these sections for you, often saving time and money to complete the job. These sections should be designed considering who(m) will be installing the wall and where it is physically located on the project site.

installing rounded baseboard corners

Step 4) Choosing the right sizes, shapes, and colors to make your glass block walls and bars cool and unique.

o There are a wide selection of block sizes, patterns, shapes, colors, artistically designed murals, and lighting options readily available for your wall or bar. Here’s a overview of your options:

o Sizes and thicknesses of glass blocks for walls or bars – Glass masonry units are made is both metric and American sizes. Most with the blocks available in the United States are American sized. The American sized blocks are out there in 4″ x 8″, 6″ x 6″, 6″ x 8″, 8″ x 8″, and 12″ x 12″. Specialty shapes can help you turn corners, make 45 degree angles, produce rounded or radius walls if you’re looking to produce a walk in or roll in shower, or finish off the end on the wall or bar with a smooth bullnose look. The blocks have nominal sizes meaning the actual size from the block units is ¼” smaller allowing for a mortar joint to adhere the block to one another (an 8″ x 8″ block actually measures 7 ¾” x 7 ¾”). The blocks for walls and bars are 3″ and 4″ thick. Thinner block (3 1/8″ thick) are more cost effective, but design and style options are more limited in this thickness of block.

o Patterns, designs and color glass blocks – Blocks come in a multitude of patterns providing different levels of privacy, style, and design and style options. The block are now available in standard and custom colors, tints, and artistically decorated murals to match any interior style style. Check out a comprehensive block web site to see the possibilities.

o Lighting your blocks – Placing lights behind a glass wall has increased in popularity. Consider a fiber optic system (exactly where the colors from the block wall can change as the system is running) or standard rope lighting behind a clear wall for extra impact.

Step 5) Don’t worry about any in the first 4 measures and call a glass block supplier, wall panel manufacturer and installation professional – If you really don’t need to figure out what size, shape, and design and style layout is best call a block specialty company who offers design, supply, wall fabrication and installation services. This type of company will usually come to your property or business (without a charge), measure your shower space, figure out the possible designs for you, and install it with a guarantee.